Text Box: MultiVision™ - Aerosol Cans Text Box: Specifications Text Box:   Text Box: OneVision innovations help the canning industry improve quality at reduced costs. The MultiVision™ system saves inspector’s time through quick, automated, precision measurements. Text Box: Can Heights, Flange Width, & "S" Dimension in under 5 seconds Measurement Resolution = 0.00008 inches ( 2 microns) Flange Width Range 0.000 to 0.1400 inches Measures Aerosol Can Sizes 200 to 311 diameter Can Height Range 1.00 to 12.50 inches Measurement Units in inches, mils, or millimeters Dual axis scan system Precision Edge Detection using OneVision® Proprietary Software Additional Optional Measurements Flange Length Bead Depth Neck Dimensions Automated Calibration by User MultiVision™ Gauge Dimensions: 20" wide x 15" deep x 21" high Power Requirement 120VAC 50/60 Hz

 

Text Box: S Text Box: Can Height Measurement Text Box: Flange Measurement Text Box: S Dimension

Table of Contents
  OneVision Overview
  Measurement Systems by Industry
    Can Makers - pg. 1
    Can Makers - pg. 2
    Food Processors - pg. 1
    Food Processors - pg. 2
    Aerosol Can Makers - pg. 1
    Aerosol Can Makers - pg. 2
     
  Measurement Products
    Measurement Module - Seam Measurement
    Measurement Module - Seam Thickness         Measurement
    Countersink Gauge
    Flange Width Gauge
    Can Height Gauge
    Body Blank Gauge
    Can Diameter Gauge - pg. 1
    Can Diameter Gauge - pg. 2
    Plug Diameter Gauge
    MultiVision Profiler for Sanitary Cans - pg. 1
    MultiVision Profiler for Sanitary Cans - pg.2
    MultiVision Profiler for Aerosol Cans - pg. 1
    MultiVision Profiler for Aerosol Cans - pg. 2
     
  Mechanical Products
    Seam Saw
    Seam Stripper
     
  System & Software Products
    SeamMate System - pg. 1
    SeamMate System - pg. 2
    SeamMate Networks
    SeamMate Work Station and Report Station
    SPC Graphics Option - pg. 1
    SPC Graphics Option - pg. 2
    AutoAlert - pg. 1
    AutoAlert - pg. 2
     
Technical Support
     
Contact Information
     
Headquarters

 

 

 

 

 

 

 

 

 

Questions or problems regarding this web site should be directed to webmaster@seammate.com
Copyright © 2007 OneVision Corporation. All rights reserved.
Last modified: 01/11/07.