Text Box: MultiVision™ Text Box: Can Height Measurement Text Box: Flange Measurement Text Box: Can Bead Measurement Text Box: OneVision innovations help the canning industry improve quality at reduced costs. The MultiVision™ system saves inspector’s time through quick, automated, precision measurements. Text Box: Can Height, Flange Width, & Bead Depths In Under 5 Seconds Measurement Resolution = 0.00008 inches ( 2 microns) Bead Depth Range 0.000 to 0.0800 inches Flange Width Range 0.000 to 0.1400 inches Measures Sanitary, Aerosol & Beverage Can Sizes 200 to 610 Can Height Range 1.00 to 10.50 inches Measurement Units in inches, mils, or millimeters Precision Edge Detection using OneVision® Proprietary Software Additional Optional Measurements Flange Length Bead Depth Neck Dimensions Automated Calibration by User MultiVision™ Gauge Dimensions: 20" wide x 15" deep x 21" high Power Requirement 120VAC 50/60 Hz Text Box: Specifications

Table of Contents
  OneVision Overview
  Measurement Systems by Industry
    Can Makers - pg. 1
    Can Makers - pg. 2
    Food Processors - pg. 1
    Food Processors - pg. 2
    Aerosol Can Makers - pg. 1
    Aerosol Can Makers - pg. 2
     
  Measurement Products
    Measurement Module - Seam Measurement
    Measurement Module - Seam Thickness         Measurement
    Countersink Gauge
    Flange Width Gauge
    Can Height Gauge
    Body Blank Gauge
    Can Diameter Gauge - pg. 1
    Can Diameter Gauge - pg. 2
    Plug Diameter Gauge
    MultiVision Profiler for Sanitary Cans - pg. 1
    MultiVision Profiler for Sanitary Cans - pg.2
    MultiVision Profiler for Aerosol Cans - pg. 1
    MultiVision Profiler for Aerosol Cans - pg. 2
     
  Mechanical Products
    Seam Saw
    Seam Stripper
     
  System & Software Products
    SeamMate System - pg. 1
    SeamMate System - pg. 2
    SeamMate Networks
    SeamMate Work Station and Report Station
    SPC Graphics Option - pg. 1
    SPC Graphics Option - pg. 2
    AutoAlert - pg. 1
    AutoAlert - pg. 2
     
Technical Support
     
Contact Information
     
Headquarters

 

 

 

 

 

 

 

 

 

Questions or problems regarding this web site should be directed to webmaster@seammate.com
Copyright © 2007 OneVision Corporation. All rights reserved.
Last modified: 01/11/07.