Removing the coverhook by hand is difficult,
time-consuming and dangerous. The OneVision Seam Stripper
easily and safely removes the coverhook for tightness
inspection or measurements. The Seam Stripper can remove
the coverhook after slots have been cut across the seam.
|
|
| Capabilities |
- Reliably strips slotted cans
- Simple, easy coverhook removal
- Quick stripper head change
- Quick can positioning
- Captures stripped seam segments
- Rugged stripper head with four cutter wheels
- Single control for height set and stripper feed
- Rugged drive system for low maintenance
|
| Specifications |
- Accommodates 200x100 to 700x800 cans
- Accommodates beverage, aerosol, food, paint cans
- Typical time to strip one seam: 5 seconds
- Typical time to change stripper heads: 15 seconds
- No cutter wheel adjustments are needed on site
- Typical cutter wheel life over 6 months
- Cutter head guard assures safe cutting operation
- Four easily changed cutter wheels per head
- No maintenance except cutter wheel replacement
- Replace cutter wheels without adjustment
- Optimal stripper head speed for safety and clean
seam removal
- Rugged gear motor drive
- Weight 75 lbs
- Dimensions 16”x12”x30”
- Power Requirement 120VAC 50/60 Hz
|
| OneVision innovations help the canning industry improve
quality at reduced costs. The Seam Stripper saves
inspector’s time through rapid and safe seam stripping. |
| |
| |
| |
