MultiVision™ is a precision scanning
microscope profiler system which provides can manufacturers
and canners fast, automatic, non-contact measurements of
flange width, bead depth and can height for immediate
display and analysis
|
|
| Capabilities |
- Flange width, flange length, can height and bead
depths in a single scan
- Non-Contact scanning measurements
- Excellent precision from OneVision proprietary
imaging software
- Typical scan time less than 5 seconds
- Measurements automatically recorded and displayed
- Magnetic can base provides quick, easy placement of
all can sizes
- Measurement position easily configured
|
Flange Measurement |
Can Bead Measurement |
Can Height Measurement |
| |
| Specifications
|
- Can Height, Flange Width, & Bead Depths In Under 5
Seconds
- Measurement Resolution = 0.00008 inches ( 2 microns)
- Bead Depth Range 0.000 to 0.0800 inches
- Flange Width Range 0.000 to 0.1400 inches
- Measures Sanitary, Aerosol & Beverage Can Sizes 200
to 610
- Can Height Range 1.00 to 10.50 inches
- Measurement Units in inches, mils, or millimeters
- Precision Edge Detection using OneVision®
Proprietary Software
- Additional Optional Measurements Flange Length
Bead Depth Neck Dimensions
- Automated Calibration by User
- MultiVision™ Gauge Dimensions: 20” wide x 15” deep x
21” high
- Power Requirement 120VAC 50/60 Hz
|
| OneVision innovations help the canning
industry improve quality at reduced costs. The MultiVision™
system saves inspector’s time through quick, automated,
precision measurements |
| |
